Image coming soonimages/solar-rooftop.jpg
01
Rooftop Solar (On-Grid)
The most common configuration, where power is generated on your roof, consumed on site first and exported as the balance.
Image coming soonimages/solar-monitoring-and-om.jpgSolar Energy Systems · 07 of 07
About the Monitoring & O&M
- String-level monitoring shows which part of the array has stopped performing, instead of only telling you the total is lower.
- Soiling is the largest recoverable loss on most Indian sites, and the cleaning cycle should be decided by dust levels rather than the calendar.
- Inverter faults, earth leakage and connector degradation are found by alarms and thermography before they become downtime.
- Generation is reported against a guaranteed figure each month, so any underperformance is identified and addressed early.
Specifications
- MonitoringString or module level, remote access
- Cleaning12 to 24 cycles per year, site dependent
- ReportingMonthly generation against guarantee
- InspectionThermography and IV curve tracing, annual
- ResponseDefined service level agreement
Figures are indicative. Your roof, tariff and consumption pattern decide the final design.
